Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-183-7808 | Model: M2104-2-30W

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-183-7808
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Service Characteristics
Antifoam and antiwear and corrosion resistive
Quantity Within Each Unit Package
Bulk
Viscosity At Rated Temp
8.20 210 degrees fahrenheit and 82.00 100 degrees fahrenheit and 110.00 100 degrees fahrenheit
Maximum Pour Point
0.0 degrees fahrenheit
Minimum Flash Point And Test Method
425.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
30 grade

Inventory Check

The last inventory check on this NSN was done on 04/18/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 115
  • New Surplus: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-183-7808 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • M2104-2-30W
  • MIL-PRF-2104
  • ALLIEDC030
  • MILL2104
Cage Codes:
  • Military Specifications (CAGE 81349)
  • Amoco Oil Co (CAGE 15958)
Replacements:
  • 9150-00-183-7808 replaces 9150-00-231-6652
  • 9150-00-183-7808 replaces 9150-00-753-4764
  • 9150-00-183-7808 replaces 9150-00-754-2832
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ADPE

- Represents items with no adp components

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    145000 - Oil o/t petro lubricating noi

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    Y
  • Quantity per pack
    # blk
  • Unit of Measure
    Gl
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $11.87 to $19.78..
Does NSN 9150-00-183-7808 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Germany
What is the NIIN of NSN 9150-00-183-7808?
001837808 or 00-183-7808
Does NSN 9150-00-183-7808 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-183-7808?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Feb 19, 1971
MSDS

Material Safety

MSDS BDGXF MIL-L-2104,LUBRICATING OIL,INTRNL,ENG GR 20

Hazards

Effects of overexposure: dermatitis in sensitive individuals after
extended exposure

First Aid

First aid: eyes: flush with plenty of water. Call physician. Skin: wash
with soap & water.Ingestion: call physician

Chemical Properties

Hcc: v6
spec gravity: 0.9159
solubility in water: insoluble
appearance and odor: oily liquid, no objectionable odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing material

Proper Disposal

Waste disposal methods: absorption controlled burning.Observe
local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbon
fraction by wt: 100%
acgih tlv: unk

MSDS BDGXG DELVAC 1330 (SAE 30)

Hazards

Effects of overexposure: skin: slight irrit

First Aid

First aid: eyes: flush w/ h*20 for 15 min. Skin: wash w/ soap & water.

inhal: remove-from expos. If uncon-seek medical help. Of breath
stops give mouth to mouth resuscitation. Ingest: if >0.5 liter(pint)
ingest,imme d give 1-2 glasses of h*20. (see supp data)

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f;316c
solubility in water: negligible
appearance and odor: clear liquid;mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: strong oxidation
hazardous decomposition products: metal oxides, co

Proper Disposal

Waste disposal methods: mfr recommends diluting waste w/ a flammable
solvent (fl pt about 100f) & dispose by supervised incineration.

disposal method must be iaw federal, state and local codes.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: >90%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192

ingred name: additives
fraction by wt:

MSDS BPYDQ MIL-L-2104D/46152B SAE 30

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: low toxicity. May
cause gi tract irritation. Inhalation: inhalation of
mist/vapors/fumes may cause respiratory tract irritation. Small
amount aspirated into lungs may cause chemical pne umonitis.

eye: irritation. Skin: repeatedcontact may cause irritation.

chronic: dermatitis, oil acne or folliculitis.

explanation of carcinogenicity: none
effects of overexposure: eyes: redness or irritaion, skin: dryness,
flaking. Ingestion: diarrhea. Inhalation of mist/vapors: coughing or
difficulty in breathing.

medical cond aggravated by exposure: skin diseases.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.

Chemical Properties

Hcc: v6
spec gravity: 0.89
ph: neutrl
solubility in water: insoluble
appearance and odor: dark brown liquid, mild petroleum odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, such as chlorates, nitrates, & peroxides
stability condition to avoid: open flames, high heat.

hazardous decomposition products: fumes, smoke, oxides of sulfur and
carbon, aldehydes.

Proper Disposal

Waste disposal methods: place contaminated materials in disposable
containers & dispose of in accordance w/federal, state, & local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: distillates, hydrotreated heavy paraffinic. Ingred #1 or #2
= >85%.

cas: 64742-54-7
rtecs #: py8035500
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm

ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic. Ingrd #1 or #2 is present =>85%
cas: 64742-65-0
rtecs #: py8038500
other rec limits: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 (oil mist)

ingred name: additives including longchain alkylphenate sulfide,
inhibitors and dispersants.

other rec limits: none recommended

ingred name: zinc alkyldithiophosphate. Ingredient #3 & #4 =
cas: 68649-42-3
other rec limits: none recommended

MSDS BPYDR SR 4230 SAE 30

Hazards

Ld50 lc50 mixture: oral, rat ld50: >5 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: low toxicity. May
cause gi tract irritation. Inhalation: inhalation of
mist/vapors/fumes may cause respiratory tract irritation. Small
amount aspirated into lungs may cause chemical pne umonitis.

eye: irritation. Skin: repeatedcontact may cause irritation.

chronic: dermatitis.

explanation of carcinogenicity: none
effects of overexposure: eyes: redness or irritaion, skin: dryness,
flaking. Ingestion: diarrhea. Inhalation of mist/vapors: coughing or
difficulty in breathing.

medical cond aggravated by exposure: skin diseases.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.

Chemical Properties

Hcc: v6
vapor density: >15
spec gravity: 0.88
ph: 6.6
evaporation rate & reference: 1000x slower (ether=1)
solubility in water: insoluble
appearance and odor: dark liquid, mild oil odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, such as chlorates, nitrates, & peroxides
stability condition to avoid: open flames, high heat.

hazardous decomposition products: fumes, smoke, oxides of sulfur, zinc
and carbon.

Proper Disposal

Waste disposal methods: place contaminated materials in disposable
containers & dispose of in accordance w/federal, state, & local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: refined heavy paraffinic distillates ( or it may contain
ingred #2 or #3)
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: residual oils, solvent refined
cas: 64742-01-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: residual oils, hydrotreated
cas: 64742-57-0
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: zinc alkyldithiophosphate
cas: 68649-42-3
other rec limits: none recommended

ingred name: borated polyisobutenyl succinic anhydride
other rec limits: none recommended

ingred name: magnesium alkyaryl detergent
other rec limits: none recommended

ingred name: methacrylate copolymer ( either #7 or ingrd #8)
other rec limits: none recommended

ingred name: dialkyl fumarate/vinyl acetate copolymer
other rec limits: none recommended

ingred name: magnesium
cas: 7439-95-4
rtecs #: om2100000
fraction by wt: 0.13%
other rec limits: none recommended
osha pel: 10 mg/m3 as mgo
acgih tlv: 10 mg/m3 as mgo

ingred name: phosphorus compounds
fraction by wt: 0.12%
other rec limits: none recommended

ingred name: zinc (sara iii)
cas: 7440-66-6
rtecs #: zg8600000
fraction by wt: 0.13%
other rec limits: none recommended
osha pel: 10 mg zno/m3
acgih tlv: 10 mg zno/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs