Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 01/13/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $145.03 to $241.72.. | |
Does NSN 9150-01-018-8960 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Navy, Slovakia, Bulgaria, Brazil, Spain, Singapore, Kuwait, New Zealand, France, Germany, Republic Of Korea, Italy, Greece, and Turkey | |
What is the NIIN of NSN 9150-01-018-8960? | |
010188960 or 01-018-8960 | |
Does NSN 9150-01-018-8960 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-01-018-8960? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Apr 01, 1976 |
Effects of overexposure: skin: rashes as a result of prolonged contact.
eye: irritant.
First aid: ingest: do not induce vomiting. If aspiration is caused by
vomiting, call md immediately. Skin: if rashes occur, see md. Eye
wash immediately with water for 15 minutes.
Hcc: v6
boiling pt: b.P. Text: >650f;343c
solubility in water: insoluble
Stability indicator/materials to avoid: yes
hazardous decomposition products: none
Waste disposal methods: dispose iaw federal, state and local codes.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: grease, common lubricant
Effects of overexposure: may cause temporary discomfort to eyes
First aid: flush eyes w/water
Hcc: v6
boiling pt: b.P. Text:
spec gravity: 1.1000
evaporation rate & reference:
solubility in water: negligible
appearance and odor: very little odor, paste-like, come color
Stability indicator/materials to avoid: yes
oxidizing material can cause reaction
hazardous decomposition products: metal oxides, co*2, traces of
incompletely burned co prod
Waste disposal methods: recommended methods are landfill & incineration.
however, dow corning suggests that all local, state, fed
regulations concerning health & pollution be reviewed to determine
approved disposal procedure s.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Effects of overexposure: mild irrit to eyes
First aid: eyes: wash w/water 15 min, consult md. Skin: wash w/soap &
water. Ingest: consult md. Inh: n/a, mfr.
Hcc: v6
spec gravity: 0.9500
solubility in water: negligible
appearance and odor: pinkish-gray grease; bland odor.
Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: thermal decomposition: co*2 & /or co
Waste disposal methods: follow fed, state, local reg for disposal of
lubricating grease.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2 ethyl hexyl sebacate (10-15%)
cas: 122-62-3
rtecs #: vs1000000
ingred name: lithium hydroxy stearate (10-15%)
ingred name: dimethyl polysiloxane (70-80%)
cas: 9016-00-6
rtecs #: tq2690000
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation: normal application
of product as a grease or lubricant should not create inhalation
effects or hazard. Skin: may be a mild irritant to sensitive skin
on prolonged contact. Eyes: mil d irritant. Ingestion: no
significant effects known. Chronic: unknown for this product.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none known.
First aid: inhal: remove to fresh air. Support breathing (give
oxygen/artificial respiration) . Skin: wash with soap and water.
eyes: flush with water for at least 15 minutes. Consult md. Ingest:
consult m d. Product contains mostly silicone compound.
Vapor pres: nil
spec gravity: 0.927
solubility in water: insoluble
appearance and odor: pinkish-gray grease; bland odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: thermal; oxides of carbon
Waste disposal methods: follow federal, state and local regulations for
disposal of lubricating greases. May be incinerated under
controlled conditions. Not considered a pollutant; effective waste
disposal methods should be utilized.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diphenylamine; (diphenyl amine)
cas: 122-39-4
rtecs #: jj7800000
fraction by wt:
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may be mildly irrit to eyes.
skin: prlng/rptd cntct may cause various skin disorders such as
derm, folliculitis or oil acne. Rels during high press usage may
rslt in injection of oil into skin ca using loc necrosis evid by
delayed onset of pain & tiss dmg few hrs following injection.
inhal/ingest: (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: no specific info identified. Prod has
not been tested in long-term, chronic tests. Lubricating greases
are generally considered low order of acute tox to humans &
experimental animals. Prod d oes not cntn any identified carcins,
however, hndlg proc & sfty precs should be followed to minimize
employee expos.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: eyes: flush w/water for at least 15 min while holding eyelids
open. Get med attn. Skin: remove contamd clthg & wipe excess off.
wash w/soap & water or waterless hand cleaner followed by soap &
water. do not reuse clthg until thoro cleaned.If irrit persists,
get med attn. If matl is injected under skin, get med attn promptly
to pvnt serious dmg; do not wait for symps to develop. Inhal:
(supdat)
Solubility in water: insoluble
appearance and odor: smooth tan grease with slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat and open flame.
hazardous decomposition products: thermal decomp prods are highly
dependent on combust cndtns. Complex mix of airborne solid, liq
particulates & (supdat)
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester/hydrocarbons containing ings 2 & 3
rtecs #: 9999999zz
fraction by wt: 80-90%
osha pel: n/k
acgih tlv: n/k
ingred name: synthetic ester
cas: 1330-86-5
osha pel: n/k
acgih tlv: n/k
ingred name: polyalphaolefin base stock
cas: 68649-12-7
osha pel: n/k
acgih tlv: n/k
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10-20%
osha pel: n/k
acgih tlv: n/k
ingred name: other components
fraction by wt:
osha pel: n/k
acgih tlv: n/k
ingred name: supdat: are ingested. However, get medical advice. Note to
md: in gen, emesis is unnec in high viscosity, low (ing 7)
rtecs #: 9999999zz
ingred name: ing 6: viscosity, low volatility prods, i.E., most oils &
greases.
rtecs #: 9999999zz
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eyes: may cause temporary
discomfort. Skin: several repeated, prolonged exposures may cause
slight irritation. Inhalation: no irritation to nose or throat
expected. No injury is likely from rel atively short exposure.
ingestion: amounts transferred to the mouth by fingers, etc, during
normal (efts of overexp)
explanation of carcinogenicity: not relevant.
effects of overexposure: hlth haz: operations should not cause injury.
chronic: no known adverse chronic health effects, but unnecessary
exposure to any chemical should be avoided.
medical cond aggravated by exposure: this product, as with any chemical,
may enhance allergic conditions on certain people.
First aid: eyes: flush with water for at least 15 minutes. Skin: wipe
off and flush with water. Inhalation: remove to fresh air. Support
breathing (give oxygen or artificial respiration) . Ingestion: call
md immediately .
Boiling pt: b.P. Text: >300f,>149c
vapor pres:
spec gravity: 1.1
evaporation rate & reference:
solubility in water:
appearance and odor: dark brown grease, with very little odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: metal oxides, silicon dioxide, carbon
dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: manufacturer suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact manufacturer if
there are any disposa l questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
osha pel: n/k
acgih tlv: n/k
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: normal applications of product
as a grease or lubricant should not create inhalation effects or
hazard. Skin: may be a mild irritant to sensitive skin on prolonged
contact. Eye: mild irritant. Ing estion: no significant effects
known. Chronic: unknown for this product.
explanation of carcinogenicity: not relevant
effects of overexposure: see health hazards.
medical cond aggravated by exposure: none known.
First aid: inhal: remove to fresh air. Support breathing (give o*2/artf
resp) . Skin: wash w/soap & water. Eyes: flush w/water for at least
15 minutes, consult md. Ingest: consult md; product contains mostly
s ilicone compound.
Vapor pres: nil
spec gravity: 0.927
solubility in water: insoluble
appearance and odor: pinkish-gray grease; bland odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: thermal; oxides of carbon.
Waste disposal methods: disposal must be i/a/w federal, state & local
regulations . Follow regs for disp of lubricating greases. May be
incinerated under controlled cndtns. Not considered a pollutant.
effective waste d isp methods should be utilized.
Ingred name: diphenylamine
cas: 122-39-4
rtecs #: jj7800000
fraction by wt:
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3