NSN 006233-2

A_resistor_in_which_a_sliding_or_rolling_contact_moves_over_an_exposed_area_of_the_resistive_element._uniform_contact_pressure_on_the_resistance_element_is_maintained_by_positive_pressure_to_permit_smooth_electrical_and_mechanical_control_of_the_resistor_over_the_entire_resistance_range._the_resistive_element_is_constructed_of_a_combination_of_two_materials_usually_consisting_of_a_wirewound_element_with_a_coating_of_conductive_plastic_applied_over_the_resistance_wire_where_the_slider_makes_contact._may_be_constructed_of_a_single_or_multiturns_of_wire_supported_on_an_insulating_structure_on_which_the_wiper_contacts_the_coated_wire_continuously_in_the_direction_of_wiper_travel._the_opposition_to_the_flow_of_current_is_an_inherent_property_of_the_wire_used_and_is_manifested_in_the_heat_dissipated_in_the_resistor_itself._for_items_having_manually_positioned_taps_designed_to_be_set_and_fixed_prior_to_use,_see_resistor,_adjustable._for_items_with_step_by_step_variation,_see_rheostat;_and_resistor,_step_by_step._for_tandem-mounted_items_designed_to_function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:other resistor (1), variable, (as modified).

0.725 inches nominal center to center distance between mounting facilities parallel to width, 6.050 inches nominal center to center distance between mounting facilities parallel to length, 2 threaded stud circuit attachment method and quantity, white single indicator single range background color, unable to decode accuracy in percent.

NSN 6625-01-155-8861 Datasheet

(NSN) National Stock Number

6625-01-155-8861

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-155-8861

Requires Demilitarization

Yes

(INC) Item Name Code

61955

Date

Thu, Jun 16, 1983

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Length

6.050 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

0.725 inches nominal

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

dc

Criticality Code Justification

feat

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

1500.0

Indicator Type

dial w/pointer

Installation Design

panel

Material

plastic

Meter Body Height Behind Mounting Flange

1.240 inches nominal

Meter Body Width Behind Mounting Flange

4.885 inches nominal

Meter Depth Behind Mounting Flange

5.760 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 threaded stud(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Mounting Stud Diameter

0.190 inches nominal

Mounting Stud Length

0.910 inches nominal

Nuclear Hardness Critical Feature

nonhardened

Overall Height

1.520 inches nominal

Overall Length

6.030 inches nominal

Overall Width

6.690 inches nominal

Panel For Which Designed

magnetic

Pointer Color

unable to decode

Scale Marking

lb per sq in. dial 0 to 60 psid

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Special Features

red line at 33.5 psid

Style Designator

rectangular flush mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061955

Cross Reference

CAGE Codes

19623

Ge Aviation Systems Llc Dba Ge Aviation Systems Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-155-8861?

   The FSCG of the NSN 6625-01-155-8861 is 6625

2. Does the NSN 6625-01-155-8861 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-155-8861 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-155-8861 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-155-8861 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-155-8861 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Thu, Jun 16, 1983