NSN 009409

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

high solids; high penetration; solvent removable; non-sagging; transparent reddish-pink color; non-tacky; thixotropic special features, cold application type, 2 type nondefinitive spec/std data, four 1 gallon cans supplementary features, 0.0010 inches minimum and 0.0015 inches maximum film thickness.

NSN 8030-01-615-4740 Datasheet

(NSN) National Stock Number

8030-01-615-4740

(FSG) Federal Supply Group

80 - Brushes, Paints, Sealers, and Adhesives

(FSC) Federal Supply Classification

8030 - Preservative and Sealing Compounds

(NIIN) National Item Identification Number

01-615-4740

Requires Demilitarization

Yes

(INC) Item Name Code

16687

Date

Sun, Jan 13, 2013

Application Type

cold

Film Thickness

0.0010 inches minimum and 0.0015 inches maximum

Nondefinitive Spec/Std Data

2 type

Special Features

high solids; high penetration; solvent removable; non-sagging; transparent reddish-pink color; non-tacky; thixotropic

Supplementary Features

four 1 gallon cans

Usage Design

for preventing corrosion on high profile aircraft substrates, upper edge floor beams, wheel wells, pressure deck and center wing sections

Volatile Organic Compound In Grams Per Liter

395.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Pseudo Item Name Code

0016687

Cross Reference

CAGE Codes

1KQX9

Andpak, Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

CZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

55330

Water Commodity

635 - Chemicals, other than drugs or sundries

National Motor Freight Classification Item Number

050234

Questions & Answers

1. What is the FSCG of the NSN 8030-01-615-4740?

   The FSCG of the NSN 8030-01-615-4740 is 8030

2. Does NSN 8030-01-615-4740 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 8030-01-615-4740 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 8030-01-615-4740 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

5. When the NSN 8030-01-615-4740 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Sun, Jan 13, 2013