NSN 0160-4698

A bent hollow item, welded or seamless. It has a round, square or any other cross section, with a continuous periphery. It is primarily designed to convey fluids, gases and/or semisolids. Excludes:items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. For items with end fittings on one or both ends, see tube assembly, metal.

56.000 picofarads single section capacitance value per section, 0.115 inches maximum body height, 0.200 inches maximum body length, w/o mtg facilities terminal(s) on one surface body style, 0.200 inches maximum body width.

NSN 5910-01-261-9527 Datasheet

(NSN) National Stock Number

5910-01-261-9527

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-261-9527

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Thu, Aug 20, 1987

Schedule B Code

8532290040

Body Height

0.115 inches maximum

Body Length

0.200 inches maximum

Body Width

0.200 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

56.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.100 inches nominal

Dissipation Factor At Reference Temp In Percent

0.150

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-20/39 government specification

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

59660

Tusonix, Llc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

71590

Crl Components Inc

U.s./canadian manufacturers

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

04222

Kyocera Avx Components Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-261-9527?

   The FSCG of the NSN 5910-01-261-9527 is 5910

2. Does the NSN 5910-01-261-9527 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-261-9527 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-261-9527 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-261-9527 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-261-9527 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Thu, Aug 20, 1987