1. Home /
  2. FSC NSN Catalog /
  3. Veterinary Dental Imaging Equipment and Supplies: Medical /
  4. 02-0501

NSN 02-0501

Dual Gas Spring Carrying Case

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

carrying case for hf80h+ portable x-ray unit, nsn 6525014800445 special features, case carrying dual gas spring for nsn 6525014800445 part name assigned by controlling agency.

NSN 6525-01-497-4498 Datasheet

(NSN) National Stock Number
6525-01-497-4498
(NIIN) National Item Identification Number
01-497-4498
Requires Demilitarization
Yes
(INC) Item Name Code
77777
Date
Mon, May 20, 2002
Part Name Assigned By Controlling Agency
case carrying dual gas spring for nsn 6525014800445
Special Features
carrying case for hf80h+ portable x-ray unit, nsn 6525014800445

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
1814550

Cross Reference

CAGE Codes

89875
Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia
U.s./canadian manufacturers
64616
Defense Medical Standardization Board
U.s./canadian manufacturers
6W040
Minxray Inc
U.s./canadian manufacturers

Freight Information

Air Commodity
MZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
32520
Water Commodity
656 - X-ray apparatus and equipment
National Motor Freight Classification Item Number
056880

Questions & Answers

  1. What is the FSCG of the NSN 6525-01-497-4498?

    The FSCG of the NSN 6525-01-497-4498 is 6525

  2. Does NSN 6525-01-497-4498 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  3. Does NSN 6525-01-497-4498 contain precious materials?

    Item does not contain precious metal.

  4. Does NSN 6525-01-497-4498 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  5. When the NSN 6525-01-497-4498 was assigned to the Federal Catalog?

    It was assigned 24 years ago, on Mon, May 20, 2002

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Recent Updates

Last Update: 9 hours ago
View History