NSN 02027-0003

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

3.750 inches nominal bolt circle diameter, 10.000 inches nominal overall diameter, hole mounting method, 4 mounting hole quantity, 0.031 inches minimum and 0.468 inches maximum mounting hole diameter.

NSN 2530-01-321-6508 Datasheet

(NSN) National Stock Number

2530-01-321-6508

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

01-321-6508

Requires Demilitarization

Yes

(INC) Item Name Code

37476

Date

Thu, Jun 21, 1990

Schedule B Code

8708300050

Bolt Circle Diameter

3.750 inches nominal

Mounting Hole Diameter

0.031 inches minimum and 0.468 inches maximum

Mounting Hole Quantity

4

Mounting Method

hole

Overall Diameter

10.000 inches nominal

Overall Width

0.313 inches nominal

Rotating Disk Thickness

0.250 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037476

Cross Reference

CAGE Codes

60905

Harlan Global Manufacturing Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

8708-30-0050

Description

brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78433

(NAICS) North American Industrial Classification System

336340

Questions & Answers

1. What is the FSCG of the NSN 2530-01-321-6508?

   The FSCG of the NSN 2530-01-321-6508 is 2530

2. Does the NSN 2530-01-321-6508 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708300050

3. Does NSN 2530-01-321-6508 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-01-321-6508 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2530-01-321-6508 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-01-321-6508 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Thu, Jun 21, 1990