NSN 06-0743

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

powers two enflow warmers simultaneously; allows the user to set the fluid temp. of each warmer; illuminated display showing fluid temps. of both warmers; provides power for charging two batteries simultaneously; two power packs fit on an iv pole special features, power supply enflow iv heater system part name assigned by controlling agency, 3.750 inches nominal overall height, 6.000 inches nominal overall width, 9.000 inches nominal overall length.

NSN 6515-01-543-4544 Datasheet

(NSN) National Stock Number

6515-01-543-4544

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6515 - Supplies, Equipment and Medical and Surgical Instruments

(NIIN) National Item Identification Number

01-543-4544

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, Sep 13, 2006

Part Name Assigned By Controlling Agency

power supply enflow iv heater system

Overall Height

3.750 inches nominal

Overall Length

9.000 inches nominal

Overall Width

6.000 inches nominal

Special Features

powers two enflow warmers simultaneously; allows the user to set the fluid temp. of each warmer; illuminated display showing fluid temps. of both warmers; provides power for charging two batteries simultaneously; two power packs fit on an iv pole

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

1857346

Cross Reference

CAGE Codes

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

64616

Defense Medical Standardization Board

U.s./canadian manufacturers

0UJ27

Zoll Medical Corporation Dba Zoll

U.s./canadian manufacturers

36MJ2

Enginivity, Llc

Non-manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

651 - Instruments, medical and surgical

National Motor Freight Classification Item Number

056590

Questions & Answers

1. What is the FSCG of the NSN 6515-01-543-4544?

   The FSCG of the NSN 6515-01-543-4544 is 6515

2. Does NSN 6515-01-543-4544 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6515-01-543-4544 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6515-01-543-4544 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6515-01-543-4544 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Wed, Sep 13, 2006