NSN 07-101332

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel comp 1010 material, 0.093 inches minimum and 0.094 inches maximum stock diameter, sae 1010 assn std single material response material document and classification, 1.188 inches nominal overall height, not casehardened casehardening indicator.

NSN 5340-00-382-8970 Datasheet

(NSN) National Stock Number

5340-00-382-8970

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-382-8970

Requires Demilitarization

Yes

(INC) Item Name Code

02385

Date

Tue, Jan 1, 1963

Schedule B Code

7326190000

Casehardening Indicator

not casehardened

Material Document And Classification

sae 1010 assn std single material response

Material

steel comp 1010

Overall Height

1.188 inches nominal

Stock Diameter

0.093 inches minimum and 0.094 inches maximum

Style Designator

pin

Width

0.750 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002385

Cross Reference

CAGE Codes

16662

Lift Parts Mfg Co Inc Div of Echlin Mfg Co the

U.s./canadian manufacturers

66654

Tvh Parts Co.

Non-manufacturers

12603

Clark Equipment Co

U.s./canadian manufacturers

77237

Dana off Highway Products, Llc

Non-manufacturers

63477

Federal Mogul Corp Sub Wagner Brake Moog Automotive Div

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

7326-19-0000

Description

other articles of iron or steel forged or stamped, but not further worked, nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69965

(NAICS) North American Industrial Classification System

332111

Questions & Answers

1. What is the FSCG of the NSN 5340-00-382-8970?

   The FSCG of the NSN 5340-00-382-8970 is 5340

2. Does the NSN 5340-00-382-8970 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326190000

3. Does NSN 5340-00-382-8970 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-382-8970 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-382-8970 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-382-8970 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963