NSN 08055A2R2DA12A

A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also pin,straight,threaded.

1.0 millimeters minimum and 1.6 millimeters maximum body width, 2.200 picofarads single section capacitance value per section, chip type body style, 1.7 millimeters minimum and 2.3 millimeters maximum body length, 1.5 millimeters maximum body height.

NSN 5910-01-312-9119 Datasheet

(NSN) National Stock Number

5910-01-312-9119

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-312-9119

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Mon, Dec 25, 1989

Schedule B Code

8532290040

Body Height

1.5 millimeters maximum

Body Length

1.7 millimeters minimum and 2.3 millimeters maximum

Body Style

chip type

Body Width

1.0 millimeters minimum and 1.6 millimeters maximum

Capacitance Value Per Section

2.200 picofarads single section

Insulation Resistance At Reference Temp

10000.0 megohms

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Power Factor At Reference Temp In Percent

0.001

Precious Material And Location

terminal surfaces palladium and terminal surfaces silver

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Length

0.3 millimeters minimum and 0.8 millimeters maximum

Terminal Surface Treatment

palladium and silver

Terminal Type And Quantity

2 bonding pad

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Tolerance Range Per Section

-0.50 to 0.50 picofarads single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

04222

Kyocera Avx Components Corporation

U.s./canadian manufacturers

09553

Marconi Electronics Inc Marconi Instruments Div

U.s./canadian manufacturers

51190

Viavi Solutionsllc

U.s./canadian manufacturers

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-312-9119?

   The FSCG of the NSN 5910-01-312-9119 is 5910

2. Does the NSN 5910-01-312-9119 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-312-9119 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-312-9119 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5910-01-312-9119 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-312-9119 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Mon, Dec 25, 1989