NSN 08055A390KAT9A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.086 inches nominal body length, 0.030 inches nominal body height, 39.000 picofarads single section capacitance value per section, w/mtg tabs/flanges, terminals on opposite surfaces body style, 0.056 inches nominal body width.

NSN 5910-01-451-1211 Datasheet

(NSN) National Stock Number

5910-01-451-1211

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-451-1211

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Fri, Dec 5, 1997

Schedule B Code

8532290040

Body Height

0.030 inches nominal

Body Length

0.086 inches nominal

Body Width

0.056 inches nominal

Body Style

w/mtg tabs/flanges, terminals on opposite surfaces

Capacitance Value Per Section

39.000 picofarads single section

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 ac/dc single section

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

04222

Kyocera Avx Components Corporation

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

18796

Murata Erie North America Inc State College Opns

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-451-1211?

   The FSCG of the NSN 5910-01-451-1211 is 5910

2. Does the NSN 5910-01-451-1211 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-451-1211 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5910-01-451-1211 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-451-1211 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-451-1211 was assigned to the Federal Catalog?

   It was assigned 28 years ago, on Fri, Dec 5, 1997