NSN 08761

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

0.179 inches minimum and 0.189 inches maximum first diameter from head, 0.730 inches minimum and 0.770 inches maximum fastener length, 1 externally relieved body diameter quantity, 0.500 inches nominal distance from largest bearing surface of head to end of first diameter, actuator hyd end item identification.

NSN 5305-01-515-9063 Datasheet

(NSN) National Stock Number

5305-01-515-9063

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-515-9063

Requires Demilitarization

Yes

(INC) Item Name Code

01852

Date

Fri, Dec 12, 2003

End Item Identification

actuator hyd

Distance From Largest Bearing Surface Of Head To End Of First Diameter

0.500 inches nominal

Externally Relieved Body Diameter Quantity

1

Fastener Length

0.730 inches minimum and 0.770 inches maximum

First Diameter From Head

0.179 inches minimum and 0.189 inches maximum

Head Height

0.172 inches minimum and 0.190 inches maximum

Head Style

hexagon

Internal Drive Style

slot

Material

steel corrosion resisting overall

Nominal Thread Diameter

0.250 inches

Thread Class

2a

Thread Direction

right-hand

Thread Length

0.230 inches minimum and 0.270 inches maximum

Thread Quantity Per Inch

20

Thread Series Designator

unified national coarse (unc)

Width Between Flats

0.367 inches minimum and 0.375 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0001852

Cross Reference

CAGE Codes

12164

Whip-Mix Corp

U.s./canadian manufacturers

1H855

Ives Equipment Corporation Dba Ives Equipment Corp Div Ives Equipment Llc

Non-manufacturers

98991

Worcester Controls Corp P O Box 2609 Cookeville Tn 385022609

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50600

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

096640

Questions & Answers

1. What is the FSCG of the NSN 5305-01-515-9063?

   The FSCG of the NSN 5305-01-515-9063 is 5305

2. Does NSN 5305-01-515-9063 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5305-01-515-9063 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5305-01-515-9063 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5305-01-515-9063 was assigned to the Federal Catalog?

   It was assigned 22 years ago, on Fri, Dec 12, 2003