NSN 0FC7986

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.750 inches nominal body length, discrimination at specified frequencies per function in decibels, 6.000 inches nominal body height, 1.500 inches nominal body width, metal body material.

NSN 5915-00-988-4816 Datasheet

(NSN) National Stock Number

5915-00-988-4816

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-988-4816

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Mon, Jan 1, 1962

Schedule B Code

8527995030

Body Height

6.000 inches nominal

Body Length

1.750 inches nominal

Body Material

metal

Body Width

1.500 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.000 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.250 inches nominal

Frequency Band Width Per Function

40.50 kilohertz blank and 47.50 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Input Impedance Per Function W/Load

600.0 ohms blank

Insertion Loss At Reference Frequency Per Function In Decibels

5.0 blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded stud(s)

Nominal Thread Size

0.138 inches

Operating Temp Range

-29.0 to 52.0 celsius

Output Impedance Per Function W/Source Across Input

600.0 ohms blank

Overall Height

6.500 inches nominal

Reference Frequency Per Function

44.0 kilohertz blank

Specified Frequencies Of Discrimination Per Function

34.00 kilohertz blank and 40.50 kilohertz blank and 47.50 kilohertz blank and 54.00 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

09376

Omnitec Data Corp Sub of Nytronics Inc

U.s./canadian manufacturers

02734

Lockheed Martin Corporation Dba Lockheed Martin Aerostructures Div Advanced Technology Laboratories

Non-manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-988-4816?

   The FSCG of the NSN 5915-00-988-4816 is 5915

2. Does the NSN 5915-00-988-4816 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-988-4816 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-988-4816 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-988-4816 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-988-4816 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962