NSN 0N298232

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

breaks before makes single section periphery contact switching action, 115.0 ac at sea level contact voltage rating in volts, 200.0 milliamperes resistive load dc at sea level contact load current rating, 300.0 milliamperes resistive load ac at sea level contact load current rating, communications set,fiber optic an/fac-3 end item identification.

NSN 5930-01-295-8484 Datasheet

(NSN) National Stock Number

5930-01-295-8484

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-295-8484

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Mar 12, 1989

Schedule B Code

8536509020

End Item Identification

communications set,fiber optic an/fac-3

Contact Load Current Rating

200.0 milliamperes resistive load dc at sea level

Contact Load Current Rating

300.0 milliamperes resistive load ac at sea level

Contact Switching Action

breaks before makes single section periphery

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

30.0 dc at sea level

Hazardous Locations/Environmental Protection

explosion proof and salt spray resistant

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 3:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Height

0.825 inches minimum and 0.855 inches maximum

Overall Length

2.477 inches minimum and 2.659 inches maximum

Overall Width

0.860 inches minimum and 0.890 inches maximum

Pole Quantity

1 single section periphery

Precious Material And Location

common plate and terminal and contact surfaces gold and contacts silver

Precious Material

gold and silver

Shaft Diameter

0.248 inches minimum and 0.251 inches maximum single actuator

Shaft Length

1.470 inches minimum and 1.520 inches maximum single actuator

Shaft Type

round, slotted single actuator

Specification/Standard Data

98230-0n298232 manufacturers specification control

Style Designator

wafer, printed board, bushing mount

Switch Actuator Indexing Position Quantity

12 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

printed circuit

Thread Class

2a single mounting facility

Thread Length

0.292 inches minimum and 0.332 inches maximum single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

12 single section periphery

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

98230

National Security Agency

U.s./canadian manufacturers

81073

Grayhill Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-295-8484?

   The FSCG of the NSN 5930-01-295-8484 is 5930

2. Does the NSN 5930-01-295-8484 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-295-8484 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-295-8484 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5930-01-295-8484 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-295-8484 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sun, Mar 12, 1989