NSN 0N333873-4

2.480 inches minimum and 2.500 inches maximum body length, magnetic blowout arc quenching method, trip-reset actuator function, 1 alarm auxiliary switch function and quantity, at each pole actuator position designation.

NSN 5925-01-236-1017 Datasheet

(NSN) National Stock Number

5925-01-236-1017

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-236-1017

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jul 11, 1986

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Arc Quenching Method

magnetic blowout

Auxiliary Switch Function And Quantity

1 alarm

Body Length

2.480 inches minimum and 2.500 inches maximum

Body Style

multipole-multiple actuator type

Body Width

1.515 inches maximum

Boss Height

0.135 inches minimum and 0.165 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.925 inches minimum and 1.955 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.735 inches minimum and 0.765 inches maximum

Circuit Protection Type

overcurrent first location

Circuit Protection Type

overvoltage second location

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.735 inches minimum and 0.765 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.050 inches minimum and 2.070 inches maximum

External Actuator Linkage Arrangement

one and two linked

Fragility Factor

moderately rugged

Frequency In Hertz

50.0 or 60.0 first location

Inclosure Protection Type For Which Designed

moisture resistant and salt spray proof and shock resistant and vibration resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

2 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

30.0 amperes ac first location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

2000.0 dc second location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

5000.0 ac first location

Mounting Facility Type And Quantity

4 threaded hole(s)

Mounting Surface To Terminal End Distance

2.490 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 dc second location

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac first location

Pole Quantity

2

Reset Method

manual

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Switch Location And Position Designation

internal at pole one

Switch Terminal Type

tab, solder lug

Switch Voltage Rating And Type In Volts

250.0 ac and 65.0 dc

Switch Contact Arrangement

single pole, double throw

Switch Current Rating And Type In Amps

10.0 ac and 10.0 dc

Terminal Type And Quantity

4 threaded stud

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

instantaneous second location

Trip Release Characteristic

time delay first location

Trip Release Method

magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

0.150 minimum at 200 pct and 15.000 maximum at 200 pct first location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

200.0 first location

Unpackaged Unit Weight

7.400 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

98230

National Security Agency

U.s./canadian manufacturers

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-236-1017?

   The FSCG of the NSN 5925-01-236-1017 is 5925

2. Does the NSN 5925-01-236-1017 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-236-1017 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-236-1017 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-236-1017 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-236-1017 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Fri, Jul 11, 1986