NSN 10-01774-00

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes:suppressor,ignition interference.

-20.00 to 80.00 percent single section tolerance range per section, ceramic case material, 30.0 single section temp coefficient of capacitance per section in ppm per deg celsius, 25.0 dc single section nonderated continuous voltage rating and type per section, 0.050 microfarads single section capacitance value per section.

NSN 5910-01-033-3831 Datasheet

(NSN) National Stock Number

5910-01-033-3831

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-033-3831

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Wed, Jan 5, 1977

Schedule B Code

8532290040

Capacitance Value Per Section

0.050 microfarads single section

Material

ceramic case

Nonderated Continuous Voltage Rating And Type Per Section

25.0 dc single section

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

30.0 single section

Tolerance Range Per Section

-20.00 to 80.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-80.0 to 30.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

15476

Compaq Federal Llc

U.s./canadian manufacturers

28527

L3harris Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-033-3831?

   The FSCG of the NSN 5910-01-033-3831 is 5910

2. Does the NSN 5910-01-033-3831 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-033-3831 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-033-3831 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-033-3831 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-033-3831 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Wed, Jan 5, 1977