NSN 100B102KP50X

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.102 inches maximum body height, 1000.000 picofarads single section capacitance value per section, 0.110 inches nominal body width, chip type body style, 0.110 inches nominal body length.

NSN 5910-01-446-1878 Datasheet

(NSN) National Stock Number

5910-01-446-1878

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-446-1878

Requires Demilitarization

Yes

(INC) Item Name Code

00004

Date

Wed, Jun 25, 1997

Schedule B Code

8532290040

Body Height

0.102 inches maximum

Body Length

0.110 inches nominal

Body Width

0.110 inches nominal

Body Style

chip type

Capacitance Value Per Section

1000.000 picofarads single section

Material

glass case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

90.0 single section

Terminal Length

0.015 inches maximum

Terminal Type And Quantity

2 bonding pad

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000004

Cross Reference

CAGE Codes

93958

Republic Electronics Corp S Inc

U.s./canadian manufacturers

29990

American Technical Ceramics Corp Dba Atc

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

04222

Kyocera Avx Components Corporation

U.s./canadian manufacturers

55153

Knowles Cazenovia Inc.

U.s./canadian manufacturers

18796

Murata Erie North America Inc State College Opns

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-446-1878?

   The FSCG of the NSN 5910-01-446-1878 is 5910

2. Does the NSN 5910-01-446-1878 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-446-1878 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-446-1878 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-446-1878 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-446-1878 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Wed, Jun 25, 1997