NSN 100B150JMS500X

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.095 inches minimum and 0.125 inches maximum body width, chip type with tape terminals body style, 0.120 inches minimum and 0.150 inches maximum body length, 0.127 inches maximum body height, 15.0 picofarads single section capacitance value per section.

NSN 5910-01-684-6429 Datasheet

(NSN) National Stock Number

5910-01-684-6429

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-684-6429

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Fri, Nov 8, 2019

Schedule B Code

8532290040

Body Height

0.127 inches maximum

Body Length

0.120 inches minimum and 0.150 inches maximum

Body Width

0.095 inches minimum and 0.125 inches maximum

Body Style

chip type with tape terminals

Capacitance Value Per Section

15.0 picofarads single section

Material

glass case

Part Name Assigned By Controlling Agency

capacitors, fixed, ceramic dielectric porcelain

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Special Features

capacitance rating: 0.1 to 1000 pf;q-factor at +25 degrees celsius;dc rated voltage: 50 to 500 vdc;temperature co-efficient: 90 ppm/degrees celsius;operating temperature range: -55 to +125 degrees celsius

Precious Material And Location

ribbon conductor surfaces silver

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Section Quantity

1

Terminal Length

0.250 inches minimum

Terminal Type And Quantity

2 ribbon

Tolerance Range Per Section

-5.0 to 5.0 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

6KUV2

Kyocera Avx Components Corporation

U.s./canadian manufacturers

82577

Raytheon Company Dba Raytheon

Non-manufacturers

29990

American Technical Ceramics Corp Dba Atc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-684-6429?

   The FSCG of the NSN 5910-01-684-6429 is 5910

2. Does the NSN 5910-01-684-6429 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-684-6429 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-684-6429 contain precious materials?

   Item contains silver.

5. Does NSN 5910-01-684-6429 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-684-6429 was assigned to the Federal Catalog?

   It was assigned 6 years ago, on Fri, Nov 8, 2019