NSN 100D0845

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

power in p28 vdc at 100 ma max;noise immunity 8 volts;switching speed 5 msec;isolation 40 db min;insertion loss 0.5 db max;vswr 1.25 max;impedance 50 ohm nom;rf power 100 watts cw max 500 watts peak;freq dc - 400 mhz;overall dimension 2.750 in. by 2.500 in. by 1.156 in. general characteristics item description.

NSN 5985-01-054-6424 Datasheet

(NSN) National Stock Number

5985-01-054-6424

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-054-6424

Requires Demilitarization

Yes

(INC) Item Name Code

21052

Date

Mon, Jan 23, 1978

Schedule B Code

8529109000

General Characteristics Item Description

power in p28 vdc at 100 ma max;noise immunity 8 volts;switching speed 5 msec;isolation 40 db min;insertion loss 0.5 db max;vswr 1.25 max;impedance 50 ohm nom;rf power 100 watts cw max 500 watts peak;freq dc - 400 mhz;overall dimension 2.750 in. by 2.500 in. by 1.156 in.

Identification

Demilitarization Code

C - "usml or ccl military items - demil required. Remove and demilitarize installed key point(s) items as demil code "d". (note 4)."

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021052

Cross Reference

CAGE Codes

28983

Daico Industries, Inc. Dba Daico Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-054-6424?

   The FSCG of the NSN 5985-01-054-6424 is 5985

2. Does the NSN 5985-01-054-6424 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-054-6424 require demilitarization?

   "usml or ccl military items - demil required. Remove and demilitarize installed key point(s) items as demil code "d". (note 4)."

4. Does NSN 5985-01-054-6424 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-054-6424 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-054-6424 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Mon, Jan 23, 1978