NSN 10117577

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode material document and classification, 0.204 inches nominal diameter, 0.375 inches nominal loop inside diameter, 0.592 inches nominal center to center distance between loop and mounting hole, 0.810 inches nominal distance from loop center to tongue end.

NSN 5340-01-057-5502 Datasheet

(NSN) National Stock Number

5340-01-057-5502

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-057-5502

Requires Demilitarization

Yes

(INC) Item Name Code

17532

Date

Wed, Mar 15, 1978

Schedule B Code

7326908695

Center To Center Distance Between Loop And Mounting Hole

0.592 inches nominal

Diameter

0.204 inches nominal

Distance From Loop Center To Tongue End

0.810 inches nominal

Loop Inside Diameter

0.375 inches nominal

Material Document And Classification

unable to decode

Material Thickness

0.031 inches nominal

Material

unable to decode

Overall Width

0.516 inches nominal

Style Designator

offset mount

Tongue Hole Type

round, unthreaded

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017532

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

18076

Umpco, Inc. Dba Umpco Inc

U.s./canadian manufacturers

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

83930

Transdigm Inc Dba Adel Wiggins Group Div Adel Wiggins

U.s./canadian manufacturers

84971

Ta Aerospace Co Div Ta Aerospace

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7326-90-8695

Description

other articles of iron or steel not wire nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-01-057-5502?

   The FSCG of the NSN 5340-01-057-5502 is 5340

2. Does the NSN 5340-01-057-5502 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908695

3. Does NSN 5340-01-057-5502 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-057-5502 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-057-5502 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-057-5502 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Wed, Mar 15, 1978