NSN 1024117-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

waveguide type body style, 0.640 inches nominal center to center distance between mounting facilities parallel to length, continuous attenuation variation method, waveguide application design, 1 shaft adjustment device type and quantity.

NSN 5985-00-412-6152 Datasheet

(NSN) National Stock Number

5985-00-412-6152

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-412-6152

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Sat, Apr 27, 1974

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 shaft

Application Design

waveguide

Attenuation Variation Method

continuous

Body Style

waveguide type

Center To Center Distance Between Mounting Facilities Parallel To Length

0.640 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

0.640 inches nominal

Frequency Range

10.250 gigahertz minimum and 10.500 gigahertz maximum

Insertion Loss At Minimum Attenuation In Maximum Decibels

0.2

Mounting Facility Pattern

four position rectangular

Mounting Facility Type And Quantity

4 terminal with mounting holes

Operating Temp Range

-30.0 to 70.0 celsius

Overall Attenuation Range In Decibels

+0.0 to 20.0

Overall Height

3.250 inches nominal

Overall Length

3.312 inches nominal

Overall Width

1.625 inches nominal

Power Rating

100.0 milliwatts peak

Shaft Diameter

0.451 inches nominal

Shaft Length

1.093 inches nominal

Shaft Type

round, slotted

Terminal Type And Quantity

2 flange

Unthreaded Mounting Hole Diameter

0.169 inches nominal

Voltage Standing Wave Ratio

1.20

Waveguide Flange Designation

ug-136b/u

Waveguide Flange Type

choke

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

NRP - Navicp-erp 700 robbins avenue philadelphia, pa 19111-5098

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-412-6152?

   The FSCG of the NSN 5985-00-412-6152 is 5985

2. Does the NSN 5985-00-412-6152 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-412-6152 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-412-6152 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-412-6152 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-412-6152 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sat, Apr 27, 1974