NSN 104MSR102K

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

10.000 microfarads single section capacitance value per section, w/o mtg facilities terminal(s) on one surface body style, 0.571 inches maximum body length, 0.453 inches nominal center to center distance between terminals parallel to length, 0.268 inches maximum body width.

NSN 5910-01-372-8992 Datasheet

(NSN) National Stock Number

5910-01-372-8992

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-372-8992

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Tue, Mar 23, 1993

Schedule B Code

8532290040

Body Length

0.571 inches maximum

Body Width

0.268 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

10.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.453 inches nominal

Dissipation Factor At Reference Temp In Percent

1.0000

Insulation Resistance At Reference Temp

1000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

102.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.024 inches nominal

Terminal Length

0.984 inches nominal

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

74840

Illinois Capacitor Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-372-8992?

   The FSCG of the NSN 5910-01-372-8992 is 5910

2. Does the NSN 5910-01-372-8992 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-372-8992 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-372-8992 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-372-8992 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-372-8992 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Tue, Mar 23, 1993