NSN 107418

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5.000 inches nominal fork depth, 5.5000 inches nominal distance from pivot pinhole center to rod connection end, 0.120 inches nominal fork arm thickness, 0.516 inches nominal fork span width, 0.375 inches nominal end radius.

NSN 5340-00-741-1008 Datasheet

(NSN) National Stock Number

5340-00-741-1008

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-741-1008

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Tue, Jan 1, 1963

Distance From Pivot Pinhole Center To Rod Connection End

5.5000 inches nominal

End Radius

0.375 inches nominal

Fork Span Width

0.516 inches nominal

Fork Arm Thickness

0.120 inches nominal

Fork Depth

5.000 inches nominal

Hole Diameter

0.311 inches minimum

Material

steel overall

Nominal Thread Size

0.375 inches rod connection

Overall Height

0.750 inches nominal

Overall Width

0.989 inches nominal

Rod Connection Bore Depth

0.500 inches nominal

Rod Connection Bore Diameter

0.375 inches nominal

Style Designator

clevis

Thread Class

2b rod connection

Thread Direction

right-hand rod connection

Thread Length

0.500 inches nominal rod connection

Thread Series Designator

unf rod connection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

82132

Eagle Mfg Co

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

23705

Fruehauf Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-00-741-1008?

   The FSCG of the NSN 5340-00-741-1008 is 5340

2. Does NSN 5340-00-741-1008 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-741-1008 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-741-1008 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-741-1008 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963