Item Number | Cage |
---|---|
10898191-1 | 19207 |
Code | Translation |
---|---|
ABHP | The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item. |
ABKV | The length of a straight line which passes through the center of a circular figure or body, and terminates at the outside circumference. |
ACMR | A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread. |
ACMS | The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction. |
ADGN | A measurement of the longest dimension of a chamfer at the first end. |
ADGR | A measurement of the longest dimension of a chamfer at the second end. |
AMDS | A measurement indicating the diameter-pitch per measurement scale of the first end. |
AMGF | A measurement indicating the diameter-pitch per measurement scale of the second end. |
AMHP | A measurement of the extent of complete /full/ internal threads, along a line parallel to the longitudinal axis of the second end. |
AQHT | An indication of whether or not a cover is provided. |
AQSS | Designates the thread diameter and number of threads per inch of the second end. |
AQST | Designates the series/type of the threads of the second end. |
ARQS | The structural characteristic of the item. |
ASRX | An indication of the twist direction. |
CFGQ | The geometric configuration of the first end when viewed in cross section. |
CFGR | The number of teeth provided at the first end. |
CFGS | A measurement of the longest dimension of the serration at the first end, in distinction from width. |
CFGT | The length of a straight line which passes through the center of the outermost surface of the first end, and terminates at the circumference. |
CFGW | The pressure angle of the first end, expressed in degrees. |
CFGX | The geometric configuration of the second end when viewed in cross section. |
CFGY | The number of teeth provided at the second end. |
CFGZ | A measurement of the longest dimension of serration at the second end, in distinction from width. |
CFHB | The length of a straight line which passes through the center of the outermost surface of the second end, and terminates at the circumference. |
CFHC | The pressure angle of the second end, expressed in degrees. |
CFHG | Indicates the physical characteristic of the end of the solid bar at the second end. |
MATT | The chemical compound or mechanical mixture properties of which the item is fabricated. |
Length: 60-1/32", steel
Last Modified: 02/14/2017