NSN 10K1CX2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

agav criticality code justification, special aircraft and engine tool and support equipment/parts end item identification.

NSN 5998-01-486-6956 Datasheet

(NSN) National Stock Number

5998-01-486-6956

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5998 - Electrical and Electronic Assemblies, Boards, Cards and Associated Hardware

(NIIN) National Item Identification Number

01-486-6956

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Jul 12, 2001

Criticality Code Justification

agav

End Item Identification

special aircraft and engine tool and support equipment/parts

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1854006

Cross Reference

CAGE Codes

02654

Daytronic Corporation

U.s./canadian manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061045

Questions & Answers

1. What is the FSCG of the NSN 5998-01-486-6956?

   The FSCG of the NSN 5998-01-486-6956 is 5998

2. Does NSN 5998-01-486-6956 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 5998-01-486-6956 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5998-01-486-6956 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5998-01-486-6956 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Thu, Jul 12, 2001