NSN 111-300-032

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

at pole one actuator position designation, single pole type body style, trip-reset actuator function, 1.985 inches minimum and 2.015 inches maximum body length, magnetic blowout arc quenching method.

NSN 5925-01-048-7481 Datasheet

(NSN) National Stock Number

5925-01-048-7481

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-048-7481

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, Oct 3, 1977

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Arc Quenching Method

magnetic blowout

Body Length

1.985 inches minimum and 2.015 inches maximum

Body Style

single pole type

Body Width

0.745 inches minimum and 0.755 inches maximum

Boss Height

0.125 inches minimum and 0.135 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.555 inches minimum and 1.565 inches maximum

Circuit Protection Type

overcurrent single location

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.665 inches minimum and 1.665 inches maximum

Fragility Factor

moderately rugged

Inclosure Protection Type For Which Designed

fungus resistant and moisture resistant and shockproof and vibrationproof

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

6.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac single location

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Surface To Terminal End Distance

1.875 inches minimum and 1.885 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

50.0 dc single location

Pole Quantity

1

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

2 quick disconnect, male

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

time delay single location

Trip Release Method

magnetic-hydraulic single location

Trip Delay Time In Seconds Per Rated Continuous Current

0.150 minimum at 200 pct and 1.500 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 single location

Unpackaged Unit Weight

2.500 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

33214

Aydin Corp Aydin Controls Div

U.s./canadian manufacturers

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-048-7481?

   The FSCG of the NSN 5925-01-048-7481 is 5925

2. Does the NSN 5925-01-048-7481 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-048-7481 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-048-7481 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-048-7481 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-048-7481 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Mon, Oct 3, 1977