NSN 119406

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.184 inches minimum and 0.200 inches maximum center to center distance between terminals, series resonance circuit resonance, 85.0 celsius controlled reference temp, 0.402 inches maximum body width, 0.150 inches maximum body thickness.

NSN 5955-00-583-0175 Datasheet

(NSN) National Stock Number

5955-00-583-0175

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5955 - Oscillators and Piezoelectric Crystals

(NIIN) National Item Identification Number

00-583-0175

Requires Demilitarization

Yes

(INC) Item Name Code

00196

Date

Tue, Jan 1, 1963

Schedule B Code

8541900000

Body Width

0.402 inches maximum

Body Thickness

0.150 inches maximum

Center To Center Distance Between Terminals

0.184 inches minimum and 0.200 inches maximum

Circuit Resonance

series resonance

Controlled Reference Temp

85.0 celsius

Drive Level Rating

0.8 milliwatts minimum and 1.2 milliwatts maximum

Equivalent Resistance Value In Ohms

40.0 maximum

Frequency Stability In Percent

-0.0005 to 0.0005

Frequency Tolerance At Reference Temp In Percent

-0.008 to 0.008

Frequency Tolerance For Operating Temp In Percent

-0.002 to 0.002 and -0.004 to 0.004

Material

unable to decode

Mode Of Oscillation

third overtone and fifth overtone

Operable Temp Range

-55.0 to 80.0 celsius

Operating Temp Range

+80.0 to 90.0 celsius

Overall Length

0.530 inches maximum

Overall Thickness

0.183 inches maximum

Overall Width

0.435 inches maximum

Shunt Capacitance In Picofarads

7.0 maximum

Specification/Standard Data

81349-mil-c-3098/39 government specification

Specified Frequency

35.55555 megahertz

Style Designator

rectangular body, gull wing

Terminal Diameter

0.016 inches minimum and 0.019 inches maximum

Terminal Length

0.5003 inches minimum

Test Data Document

"81349-mil-c-3098/38 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000196

Cross Reference

CAGE Codes

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34525

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063025

Schedule B & Trade

Schedule B

8541-90-0000

Description

diode, transistor & similar semiconductor device parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77688

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5955-00-583-0175?

   The FSCG of the NSN 5955-00-583-0175 is 5955

2. Does the NSN 5955-00-583-0175 have a Schedule B code assigned?

   Yes, the Schedule B code is 8541900000

3. Does NSN 5955-00-583-0175 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5955-00-583-0175 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5955-00-583-0175 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5955-00-583-0175 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963