NSN 1197161

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

contains 61% ethyl alcohol in an emollient rich moisturizing base; 16 floz (500 ml) plastic pump bottle; compatible with chg; used for hand hygiene compliance; kills 99.9% of harmful bacteria; non irritating; non-drying; package of 12 special features, antiseptic hand instant 3m avagard d with moisturizers (61% w/w ethyl alcohol) 16 fl oz bottle 12s part name assigned by controlling agency.

NSN 6508-01-534-0139 Datasheet

(NSN) National Stock Number

6508-01-534-0139

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6508 - Medicated Cosmetics and Toiletries

(NIIN) National Item Identification Number

01-534-0139

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Oct 4, 2005

Part Name Assigned By Controlling Agency

antiseptic hand instant 3m avagard d with moisturizers (61% w/w ethyl alcohol) 16 fl oz bottle 12s

Special Features

contains 61% ethyl alcohol in an emollient rich moisturizing base; 16 floz (500 ml) plastic pump bottle; compatible with chg; used for hand hygiene compliance; kills 99.9% of harmful bacteria; non irritating; non-drying; package of 12

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1930663

Cross Reference

CAGE Codes

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

55957

Thermo Fisher Scientific (asheville) Llc Div Laboratory Products Division

U.s./canadian manufacturers

0NUS8

Henry Schein, Inc. Div Usdg Federal Division

Non-manufacturers

64616

Defense Medical Standardization Board

U.s./canadian manufacturers

76381

3m Company

U.s./canadian manufacturers

9KEZ3

Solventum Us Llc

Non-manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

T - 55.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

27570

Water Commodity

728 - Soaps, other than detergent

National Motor Freight Classification Item Number

048581

Questions & Answers

1. What is the FSCG of the NSN 6508-01-534-0139?

   The FSCG of the NSN 6508-01-534-0139 is 6508

2. Does NSN 6508-01-534-0139 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6508-01-534-0139 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6508-01-534-0139 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6508-01-534-0139 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Tue, Oct 4, 2005