NSN 1202989

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.125 inches nominal body height, discrimination at specified frequencies per function in decibels, 1.125 inches nominal body length, metal body material, 1.125 inches nominal body width.

NSN 5915-01-040-8064 Datasheet

(NSN) National Stock Number

5915-01-040-8064

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-040-8064

Requires Demilitarization

Yes

(INC) Item Name Code

13910

Date

Sun, May 15, 1977

Schedule B Code

8527995030

Body Height

2.125 inches nominal

Body Length

1.125 inches nominal

Body Material

metal

Body Width

1.125 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.718 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.718 inches nominal

Frequency Band Width Per Function

2.00 kilohertz blank and 3.10 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Insertion Loss At Reference Frequency Per Function In Decibels

0.5 blank

Load Impedance Per Function

100.0 ohms blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded stud(s)

Nominal Thread Size

0.112 inches

Operating Temp Range

+0.0 to 85.0 celsius

Overall Height

2.500 inches nominal

Reference Frequency Per Function

2.55 kilohertz blank

Source Impedance Rating Per Function

100.0 ohms blank

Specified Frequencies Of Discrimination Per Function

700.00 hertz blank and 1.45 kilohertz blank and 2.00 kilohertz blank and 3.10 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013910

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

03040

Power Control Devices, Inc.

U.s./canadian manufacturers

59559

Power Control Devices Inc

U.s./canadian manufacturers

56662

Frequency Selective Networks, Inc. Dba Frequency Selective Networks Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

21275

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

069100

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-040-8064?

   The FSCG of the NSN 5915-01-040-8064 is 5915

2. Does the NSN 5915-01-040-8064 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-040-8064 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-01-040-8064 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-01-040-8064 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-040-8064 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sun, May 15, 1977