NSN 121102AA2

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

0.750 inches nominal single actuator first flat length, breaks before makes each section rear contact switching action, 125.0 ac at sea level contact voltage rating in volts, actuator knob features provided, 10.0 amperes resistive load ac at sea level contact load current rating.

NSN 5930-00-005-3214 Datasheet

(NSN) National Stock Number

5930-00-005-3214

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-005-3214

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Jun 7, 1972

Schedule B Code

8536509025

Contact Load Current Rating

10.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

125.0 ac at sea level

Features Provided

actuator knob

First Flat Length

0.750 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Individual Section Quantity

2

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

a

Mounting Facility Circle Radius

1.156 inches nominal single mounting facility

Mounting Facility Pattern

four position circular single mounting facility

Mounting Method

threaded hole(s) single mounting facility

Nominal Thread Size

0.190 inches single mounting facility

Overall Height

2.500 inches maximum

Overall Length

2.656 inches nominal

Pole Quantity

1 each section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Length

1.125 inches nominal single actuator

Shaft Type

round, flatted, threaded hole single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2b single mounting facility

Thread Quantity Per Inch

24 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

2 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-005-3214?

   The FSCG of the NSN 5930-00-005-3214 is 5930

2. Does the NSN 5930-00-005-3214 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-005-3214 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-005-3214 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-005-3214 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-005-3214 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jun 7, 1972