1. Home /
  2. FSC NSN Catalog /
  3. Humidity Measuring and Controlling Instruments, Temperature and Pressure /
  4. 123DJ4C

NSN 123DJ4C

Air Undercoo Sensor

pacer special end item identification, sensor checks that cooling flow and/or cooling temperature is above following curve,15 deg f at 10 lb/min to90 deg f at 18.0 to 20 lb/min;normal operating range 25 to 80 deg f;when the cooling flow and/or cooling temp falls below the curve the sensor will detect insufficient cooling and switch from n.o. to n.c switch spdt 2a min rating;8 pin connector;switching,pins 3 to 4 normally closed;4-5 normally open; operating voltage 28 vdc special features, to be used in 4.5 inch dia. duct;weight 0.75 lbs;sensor incorporates an output delay of 140 pom 15 seconds;environment minus 65 degrees to 190 deg f,1.0 to 15.5 psia;accuracy 5% full scale;end fitting per ms33514e4;receptacle to mate with d38999/26wc8s connector keying d;probe length 3.76 inches pom 0.04 inch general characteristics item description, hardened nuclear hardness critical feature.

NSN 6685-01-263-0419 Datasheet

(NSN) National Stock Number
6685-01-263-0419
(NIIN) National Item Identification Number
01-263-0419
Requires Demilitarization
Yes
(INC) Item Name Code
77777
Date
Wed, Sep 9, 1987
End Item Identification
pacer special
General Characteristics Item Description
to be used in 4.5 inch dia. duct;weight 0.75 lbs;sensor incorporates an output delay of 140 pom 15 seconds;environment minus 65 degrees to 190 deg f,1.0 to 15.5 psia;accuracy 5% full scale;end fitting per ms33514e4;receptacle to mate with d38999/26wc8s connector keying d;probe length 3.76 inches pom 0.04 inch
Nuclear Hardness Critical Feature
hardened
Special Features
sensor checks that cooling flow and/or cooling temperature is above following curve,15 deg f at 10 lb/min to90 deg f at 18.0 to 20 lb/min;normal operating range 25 to 80 deg f;when the cooling flow and/or cooling temp falls below the curve the sensor will detect insufficient cooling and switch from n.o. to n.c switch spdt 2a min rating;8 pin connector;switching,pins 3 to 4 normally closed;4-5 normally open; operating voltage 28 vdc

Identification

Demilitarization Code
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
1946184

Cross Reference

CAGE Codes

60678
Rosemount Aerospace Inc. Dba Rosemount Aerospace Division Div Utas
U.s./canadian manufacturers
1W025
Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems
U.s./canadian manufacturers

Freight Information

Air Commodity
AZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Less than Carload Rating
J - 100.0
National Motor Freight Class Rating
J - 100.0
Special Handling
Z - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
33230
Water Commodity
653 - Musical instruments
National Motor Freight Classification Item Number
188340

Questions & Answers

  1. What is the FSCG of the NSN 6685-01-263-0419?

    The FSCG of the NSN 6685-01-263-0419 is 6685

  2. Does NSN 6685-01-263-0419 require demilitarization?

    "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

  3. Does NSN 6685-01-263-0419 contain precious materials?

    Item does not contain precious metal.

  4. Does NSN 6685-01-263-0419 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  5. When the NSN 6685-01-263-0419 was assigned to the Federal Catalog?

    It was assigned 39 years ago, on Wed, Sep 9, 1987

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.