NSN 12446812

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

w/attachment end type, olive drab color, buckle fastener type, mil-s-6758, comp 4130 mil spec single material response buckle material document and classification, plastic polyester location not otherwise specified material.

NSN 5340-01-415-8672 Datasheet

(NSN) National Stock Number

5340-01-415-8672

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-415-8672

Requires Demilitarization

Yes

(INC) Item Name Code

20659

Date

Sat, Jul 8, 1995

Color

olive drab

End Type

w/attachment

Fastener Type

buckle

Material Document And Classification

mil-s-6758, comp 4130 mil spec single material response buckle

Material

plastic polyester location not otherwise specified

Material

steel comp 4130 buckle

Special Features

assembly includes;fourteen buckles;twenty-four hooks

Surface Treatment Document And Classification

qq-p-416, type 2, class 2 fed spec single treatment response buckle

Surface Treatment

cadmium and chromate buckle

Width

0.940 inches minimum and 1.060 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020659

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-415-8672?

   The FSCG of the NSN 5340-01-415-8672 is 5340

2. Does NSN 5340-01-415-8672 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-415-8672 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-415-8672 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-415-8672 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Sat, Jul 8, 1995