NSN 124T8

An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. For items with round cross sections see seal, nonmetallic round section. Excludes:gasket and packing, preformed.

2.520 inches nominal body outside diameter, 9 pin terminal type and quantity, not established reliability indicator, fully inclosed inclosure type, 1.200 inches nominal body length.

NSN 5950-00-003-8228 Datasheet

(NSN) National Stock Number

5950-00-003-8228

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-003-8228

Requires Demilitarization

Yes

(INC) Item Name Code

00208

Date

Fri, May 26, 1972

Schedule B Code

8504500000

Body Length

1.200 inches nominal

Body Outside Diameter

2.520 inches nominal

Inclosure Type

fully inclosed

Reliability Indicator

not established

Terminal Type And Quantity

9 pin

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000208

Cross Reference

CAGE Codes

11700

A.e.york, Llc

Non-manufacturers

95104

Alcatel-Lucent Holdings Inc.

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-00-003-8228?

   The FSCG of the NSN 5950-00-003-8228 is 5950

2. Does the NSN 5950-00-003-8228 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-00-003-8228 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-003-8228 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-003-8228 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-003-8228 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, May 26, 1972