NSN 127-3515

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

very high contrast, extremely fine grain. special features, 17.000 inches nominal length, 0.040 silver grains, troy precious material and weight, silver precious material, emulsion silver precious material and location.

NSN 6635-01-413-0261 Datasheet

(NSN) National Stock Number

6635-01-413-0261

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6635 - Physical Properties Testing and Inspection

(NIIN) National Item Identification Number

01-413-0261

Requires Demilitarization

Yes

(INC) Item Name Code

01914

Date

Thu, May 4, 1995

Schedule B Code

9027803500

Length

17.000 inches nominal

Precious Material And Location

emulsion silver

Precious Material

silver

Precious Material And Weight

0.040 silver grains, troy

Special Features

very high contrast, extremely fine grain.

Width

7.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0001914

Cross Reference

CAGE Codes

19139

Eastman Kodak Co

U.s./canadian manufacturers

4QX22

Carestream Health, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

68045

Water Commodity

534 - Medical supplies (room temperature) (not requiring temperature control)

National Motor Freight Classification Item Number

056828

Questions & Answers

1. What is the FSCG of the NSN 6635-01-413-0261?

   The FSCG of the NSN 6635-01-413-0261 is 6635

2. Does the NSN 6635-01-413-0261 have a Schedule B code assigned?

   Yes, the Schedule B code is 9027803500

3. Does NSN 6635-01-413-0261 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6635-01-413-0261 contain precious materials?

   Item contains silver.

5. Does NSN 6635-01-413-0261 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 6635-01-413-0261 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Thu, May 4, 1995