NSN 127807

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

36.00 actuation point nominal gallons per minute contact stimulus rating, unable to decode contact load current rating, decrease contact action stimulus, actuation point not adjustable contact adjustability, unable to decode contact voltage rating in volts.

NSN 5930-01-326-5044 Datasheet

(NSN) National Stock Number

5930-01-326-5044

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-326-5044

Requires Demilitarization

Yes

(INC) Item Name Code

36841

Date

Wed, Sep 26, 1990

Schedule B Code

9026107000

Contact Action Stimulus

decrease

Contact Adjustability

actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

36.00 actuation point nominal gallons per minute

Contact Voltage Rating In Volts

unable to decode

Features Provided

hermetically sealed case

Media For Which Designed

liquid

Mounting Method

threaded bushing

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, double throw, one position momentary

Operating Temp Rating

-65.0 fahrenheit minimum and 250.0 fahrenheit maximum

Overall Length

5.375 inches nominal

Overall Width

3.094 inches nominal

Terminal Type

wire lead

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0036841

Cross Reference

CAGE Codes

04034

Setra Systems, Inc. Dba Gems Sensors

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

9026-10-7000

Description

instruments and apparatus for measuring or checking the flow or level of liquids, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87431

(NAICS) North American Industrial Classification System

334513

Questions & Answers

1. What is the FSCG of the NSN 5930-01-326-5044?

   The FSCG of the NSN 5930-01-326-5044 is 5930

2. Does the NSN 5930-01-326-5044 have a Schedule B code assigned?

   Yes, the Schedule B code is 9026107000

3. Does NSN 5930-01-326-5044 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-326-5044 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-326-5044 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-326-5044 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Wed, Sep 26, 1990