NSN 12933416

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

consists of aluminum comp 5086-h32 per qq-a-250/7 or aluminum comp 5083-h321 or h323 per qq-a-250/6; 13.400 in. long; 7.660 in. high; 0.125 in. thk; 4 holes,0.375 in. dia; 4 sloted mounting holes,0.500 in. wide,0.750 in. long; surface treatment,paint special features.

NSN 5340-01-338-0537 Datasheet

(NSN) National Stock Number

5340-01-338-0537

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-338-0537

Requires Demilitarization

Yes

(INC) Item Name Code

38089

Date

Thu, Apr 25, 1991

Special Features

consists of aluminum comp 5086-h32 per qq-a-250/7 or aluminum comp 5083-h321 or h323 per qq-a-250/6; 13.400 in. long; 7.660 in. high; 0.125 in. thk; 4 holes,0.375 in. dia; 4 sloted mounting holes,0.500 in. wide,0.750 in. long; surface treatment,paint

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0038089

Cross Reference

CAGE Codes

19200

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate

Government departments or units, including military organizations

076M6

Amz Alabama Inc.

U.s./canadian manufacturers

80212

Bae Systems Land & Armaments L.p.

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-338-0537?

   The FSCG of the NSN 5340-01-338-0537 is 5340

2. Does NSN 5340-01-338-0537 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

3. Does NSN 5340-01-338-0537 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-338-0537 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-338-0537 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Apr 25, 1991