NSN 12941476

66.0 degrees nominal first leg angle, 2.660 inches minimum and 2.900 inches maximum center section height, 0.250 inches nominal center section thickness, 1.190 inches minimum and 1.231 inches maximum center section width, 0.560 inches minimum and 0.680 inches maximum first leg distance from edge to hole center along width.

NSN 5340-01-355-0141 Datasheet

(NSN) National Stock Number

5340-01-355-0141

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-355-0141

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Tue, Mar 10, 1992

Center Section Height

2.660 inches minimum and 2.900 inches maximum

Center Section Thickness

0.250 inches nominal

Center Section Width

1.190 inches minimum and 1.231 inches maximum

First Leg Angle

66.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.560 inches minimum and 0.680 inches maximum

First Leg Hole Arrangement Style

one slot

First Leg Distance From Edge To Hole Center Along Length

0.190 inches minimum and 0.310 inches maximum

First Leg Slot Width

0.370 inches minimum and 0.440 inches maximum

First Leg Style

square

First Leg Thickness

0.250 inches nominal

First Leg Width

1.190 inches minimum and 1.310 inches maximum

First Leg Length

3.500 inches nominal

First Leg Slot Length

0.940 inches minimum and 1.060 inches maximum

Material Document And Classification

astma36 assn std 1st material response or astma575 assn std 2nd material response

Material

steel or steel comp m1020

Mounting Hole Type

plain and threaded

Second Leg Angle

90.0 degrees nominal

Second Leg Distance Between Hole Centers Along Length

4.000 inches nominal

Second Leg Hole Arrangement Style

two holes

Second Leg Hole Diameter

0.250 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.500 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.625 inches nominal

Second Leg Thickness

0.250 inches nominal

Second Leg Width

1.190 inches minimum and 1.310 inches maximum

Second Leg Length

5.630 inches minimum and 5.870 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

square

Style Designator

adjacent angles

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

19200

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-355-0141?

   The FSCG of the NSN 5340-01-355-0141 is 5340

2. Does NSN 5340-01-355-0141 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-355-0141 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-355-0141 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-355-0141 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Tue, Mar 10, 1992