NSN 12C10

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

hermetic environmental protection, single pole, single throw, normally open contact arrangement, 115.0 ac contact maximum voltage rating in volts, 10.0 fixed operate nominal delay time in seconds, 3.0 ac contact maximum current rating in amps.

NSN 5945-01-107-2081 Datasheet

(NSN) National Stock Number

5945-01-107-2081

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-107-2081

Requires Demilitarization

Yes

(INC) Item Name Code

03883

Date

Sat, Jan 31, 1981

Contact Arrangement

single pole, single throw, normally open

Contact Maximum Current Rating In Amps

3.0 ac

Contact Maximum Voltage Rating In Volts

115.0 ac

Delay Time In Seconds

10.0 fixed operate nominal

Environmental Protection

hermetic

Overall Diameter

1.125 inches nominal

Overall Length

2.750 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0003883

Cross Reference

CAGE Codes

70563

Amperite Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5945-01-107-2081?

   The FSCG of the NSN 5945-01-107-2081 is 5945

2. Does NSN 5945-01-107-2081 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5945-01-107-2081 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5945-01-107-2081 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5945-01-107-2081 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Sat, Jan 31, 1981