NSN 12SC7

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

12sc7 type nondefinitive spec/std data, envelope material: metal; mfg. class: amplifier special features.

NSN 5960-00-100-6036 Datasheet

(NSN) National Stock Number

5960-00-100-6036

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5960 - Electron Tubes and Associated Hardware

(NIIN) National Item Identification Number

00-100-6036

Requires Demilitarization

Yes

(INC) Item Name Code

00001

Date

Sun, Jan 1, 1961

Schedule B Code

8540890020

Nondefinitive Spec/Std Data

12sc7 type

Special Features

envelope material: metal; mfg. class: amplifier

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000001

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35396

Water Commodity

654 - Tubes, x-ray

National Motor Freight Classification Item Number

063476

Schedule B & Trade

Schedule B

8540-89-0020

Description

gas and vapor electron tubes, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77627

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5960-00-100-6036?

   The FSCG of the NSN 5960-00-100-6036 is 5960

2. Does the NSN 5960-00-100-6036 have a Schedule B code assigned?

   Yes, the Schedule B code is 8540890020

3. Does NSN 5960-00-100-6036 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5960-00-100-6036 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5960-00-100-6036 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5960-00-100-6036 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961