NSN 13229E3687

A gage designed for checking the setting of the indentors while the crimping tool is in the fully closed position.

15.250 inches nominal center section width, 3.125 inches nominal first leg distance from edge to hole center along width, 90.0 degrees nominal first leg angle, 0.120 inches nominal center section thickness, 11.440 inches nominal center section height.

NSN 5340-01-319-4866 Datasheet

(NSN) National Stock Number

5340-01-319-4866

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-319-4866

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Wed, May 9, 1990

Center Section Height

11.440 inches nominal

Center Section Thickness

0.120 inches nominal

Center Section Width

15.250 inches nominal

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

3.125 inches nominal

First Leg Hole Arrangement Style

3 slots

First Leg Distance Between First And Second Hole Centers Along Width

4.500 inches nominal

First Leg Distance Between Second And Third Hole Centers Along Width

4.500 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.755 inches nominal

First Leg Slot Width

0.436 inches minimum and 0.443 inches maximum

First Leg Style

square

First Leg Thickness

0.120 inches nominal

First Leg Width

15.250 inches nominal

First Leg Length

1.880 inches nominal

First Leg Slot Length

0.750 inches minimum and 0.812 inches maximum

Material Document And Classification

astm a366 assn std single material response or astm a569 assn std single material response

Material

steel

Mounting Hole Type

plain

Special Features

bend radius 0.250 in.

Second Leg Angle

90.0 degrees nominal

Second Leg Distance Between Hole Centers Along Length

3.500 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

4.580 inches nominal

Second Leg Hole Arrangement Style

4 slots

Second Leg Distance Between Hole Centers Along Width

6.090 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

1.495 inches nominal

Second Leg Thickness

0.120 inches nominal

Second Leg Width

15.250 inches nominal

Second Leg Length

19.740 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Slot Length

0.750 inches minimum and 0.812 inches maximum

Second Leg Slot Width

0.436 inches minimum and 0.443 inches maximum

Second Leg Style

square

Style Designator

double angle

Surface Treatment Document And Classification

mil-t-704,ty f mil spec single treatment response

Surface Treatment

paint

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

97403

Cecom Lr Center

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-319-4866?

   The FSCG of the NSN 5340-01-319-4866 is 5340

2. Does NSN 5340-01-319-4866 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-319-4866 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-319-4866 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-319-4866 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Wed, May 9, 1990