NSN 135-058

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

1.318 inches maximum center to center distance between mounting facilities parallel to width, 2 solder lug and 2 solder stud circuit attachment method and quantity, 1.318 inches maximum center to center distance between mounting facilities parallel to length, unable to decode accuracy in percent, black single indicator single range background color.

NSN 6625-01-033-5488 Datasheet

(NSN) National Stock Number

6625-01-033-5488

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-033-5488

Requires Demilitarization

Yes

(INC) Item Name Code

16449

Date

Fri, Jan 7, 1977

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

black single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Length

1.318 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

1.318 inches maximum

Circuit Attachment Method And Quantity

2 solder lug and 2 solder stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

1500.0

Environmental Protection

airtight and dust resistant and fungus resistant and heat resistant and humidity resistant and shock resistant and vibration resistant and water resistant

Features Provided

magnetic shield and zero adjuster

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

nut 4; lockwasher 4; seal 1

Indicator Type

dial w/pointer

Installation Design

panel

Material

steel

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

1.510 inches maximum

Meter Depth Behind Mounting Flange

1.000 inches maximum

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Hole Diameter

0.125 inches nominal

Mounting Facility Type And Quantity

4 screw and 4 unthreaded hole(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Nuclear Hardness Critical Feature

nonhardened

Overall Height

1.805 inches maximum

Overall Length

1.625 inches maximum

Overall Width

1.805 inches maximum

Pointer Color

unable to decode

Power Source

external

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Sensitivity Rating

1.0 milliamperes

Special Features

ruggedized

Special Test Features

complies with mil-m-10304

Style Designator

rectangular flush mtg

Surface Treatment

enamel semigloss

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016449

Cross Reference

CAGE Codes

33005

Jewell Instruments Llc

U.s./canadian manufacturers

21877

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

77221

Phaostron Instrument and Electronic Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-033-5488?

   The FSCG of the NSN 6625-01-033-5488 is 6625

2. Does the NSN 6625-01-033-5488 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-033-5488 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-033-5488 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-033-5488 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-033-5488 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Jan 7, 1977