NSN 135442

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

paste physical form, clear color, 20.000 grams quantity within each unit package, plastic material, ethyl cyanoacrylate; high viscosity; service temperature range of minus 65 deg f to plus 180 deg f special features.

NSN 8040-01-321-1254 Datasheet

(NSN) National Stock Number

8040-01-321-1254

(FSG) Federal Supply Group

80 - Brushes, Paints, Sealers, and Adhesives

(FSC) Federal Supply Classification

8040 - Adhesives

(NIIN) National Item Identification Number

01-321-1254

Requires Demilitarization

Yes

(INC) Item Name Code

11297

Date

Sun, Jun 10, 1990

Color

clear

Material

plastic

Physical Form

paste

Quantity Within Each Unit Package

20.000 grams

Special Features

ethyl cyanoacrylate; high viscosity; service temperature range of minus 65 deg f to plus 180 deg f

Specific Usage Design

for general purpose rapid bonding of metals, plastics and rubbers

Supplementary Features

material must be shipped,stored, and has an excursion temperature range of 36 to 46 deg f

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Hazardous Characteristics Code

V4 - Dot combustible liquid, osha iiia

Pseudo Item Name Code

0011297

Cross Reference

CAGE Codes

05972

Loctite Corp

U.s./canadian manufacturers

25795

W.w. Grainger, Inc. Div Government Sales Division

Non-manufacturers

F0667

Exail Robotics

Non-us manufacturer (nato), other foreign organization or codification bureaus

61603

Hernon Manufacturing, Inc.

U.s./canadian manufacturers

54418

Miltope Corporation

U.s./canadian manufacturers

1U766

Henkel Corp Polymers Div

U.s./canadian manufacturers

2K180

Seattle Tool & Supply Co. Inc. Dba Seattle Tool & Solder Supply

Non-manufacturers

Freight Information

Air Commodity

CD -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

U - Combustible liquids (no label)

Uniform Freight Classification Item Number

02480

Water Commodity

705 - Cement, liquid

National Motor Freight Classification Item Number

004620

Questions & Answers

1. What is the FSCG of the NSN 8040-01-321-1254?

   The FSCG of the NSN 8040-01-321-1254 is 8040

2. Does NSN 8040-01-321-1254 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 8040-01-321-1254 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 8040-01-321-1254 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

5. When the NSN 8040-01-321-1254 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sun, Jun 10, 1990