NSN 1362964-01

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.750 inches nominal diameter, 2 cable conductor quantity, 18.0 feet nominal extended cable length, hand held body style, integral cable electrical connection type.

NSN 5965-00-196-7320 Datasheet

(NSN) National Stock Number

5965-00-196-7320

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

00-196-7320

Requires Demilitarization

Yes

(INC) Item Name Code

00362

Date

Wed, Jun 17, 1970

Schedule B Code

8518903000

Body Style

hand held

Cable Conductor Quantity

2

Diameter

0.750 inches nominal

Electrical Connection Type

integral cable

Extended Cable Length

18.0 feet nominal

Frequency Response Range In Hertz

+60.0 to 12000.0

Fsc Application Data

headsets,handsets,microphones and speakers

Impedance Rating

150.0 ohms nominal

Length

3.625 inches nominal

Mounting Method

clip and cord and swivel adapter

Output Sensitivity Rating In Decibels

-155.0

Output Sensitivity Rating Reference

1 milliwatt per 10 microbars

Polarity Connection

required

Sound Pickup Directional Type

omnidirectional

Supplementary Features

no connector at microphone terminal; nonmetalic diaphragm withstands high humidity,temp extremes,salt air,and mech shocks

Unpackaged Unit Weight

0.125 pounds nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000362

Cross Reference

CAGE Codes

92739

Ampex Systems Corp

U.s./canadian manufacturers

81134

Bosch Security Systems, Inc Dba Use Cage Code 25734 for Cataloging Div Communications Division

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87660

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

178580

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-00-196-7320?

   The FSCG of the NSN 5965-00-196-7320 is 5965

2. Does the NSN 5965-00-196-7320 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-00-196-7320 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-00-196-7320 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-00-196-7320 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-00-196-7320 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Wed, Jun 17, 1970