NSN 138C206H01

An item mounted on a disk, compressor, aircraft gas turbine engine. It is designed to create the flow of air in the compressor section of an engine, gas turbine, aircraft.

trip-reset actuator function, magnetic blowout arc quenching method, multipole-multiple actuator type body style, at each pole actuator position designation, 2.490 inches minimum and 2.510 inches maximum body length.

NSN 5925-00-007-3962 Datasheet

(NSN) National Stock Number

5925-00-007-3962

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-007-3962

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jul 7, 1972

Schedule B Code

8536200040

Inclosure Protection Type For Which Designed

Dustproof and fungus proof

Trip Delay Time In Seconds Per Rated Continuous Current

2.500 to 9.500 at 200 pct all locations

Internal Trip Release Configuration

Series trip all locations

Nominal Thread Size

0.138 inches

Actuator Position Designation

At each pole

External Actuator Linkage Arrangement

One, two, and three linked

Manual Actuator Type and Quantity

3 toggle

Actuator Function

Trip-reset

Reset Method

Manual

Main Contact Tripping Mechanism Type

Trip free

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

400.0 all locations

Trip Release Characteristic

Time delay all locations

Trip Release Method

Magnetic-hydraulic all locations

Circuit Protection Type

Overcurrent all locations

Highest Interrupting Capacity Current Type and Rating Per Pole In Amps

3500.0 ac all locations

Operating Voltage Type and Rating Per Pole In Volts

208.0 ac all locations

Highest Continuous Load Current Rating Per Pole

3.0 amperes ac all locations

Storage Type

General purpose warehouse

Thread Quantity Per Inch

32

Arc Quenching Method

Magnetic blowout

Mounting Facility Type and Quantity

6 threaded hole

Pole Quantity

3

Fragility Factor

Moderately rugged

Mounting Surface To Terminal End Distance

1.990 inches to2.010 inches

Center To Center Distance Between Terminals Parallel To Width

0.740 inches to 0.760 inches

Center To Center Distance Between Terminals Parallel To Length

1.180 inches to 1.200 inches

Body Width

2.263 inches to 2.283 inches

Case Material

Plastic

Body Length

2.490 inches to 2.510 inches

Bushing Length

0.146 inches to 0.166 inches

Body Style

Multipole-multiple actuator type

Frequency In Hertz

60.0 all locations

Thread Series Designator

Unc

Terminal Type and Quantity

6 tab w/screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-007-3962?

   The FSCG of the NSN 5925-00-007-3962 is 5925

2. Does the NSN 5925-00-007-3962 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-007-3962 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-007-3962 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-00-007-3962 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-007-3962 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 7, 1972

7. What is the body length of nsn 5925-00-007-3962?

   2.490 inches to 2.510 inches

8. What is the body length of nsn 5925-00-007-3962?

   2.490 inches to 2.510 inches

9. What is the body length of nsn 5925-00-007-3962?

   2.490 inches to 2.510 inches