NSN 14071973

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

three holes first leg hole arrangement style, 90.0 degrees nominal first leg angle, 0.391 inches minimum and 0.406 inches maximum first leg hole diameter, 0.910 inches nominal first leg distance from edge to hole center along width, 1.340 inches nominal first leg distance between hole centers along length.

NSN 5340-01-160-4591 Datasheet

(NSN) National Stock Number

5340-01-160-4591

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-160-4591

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Tue, Aug 23, 1983

Schedule B Code

8302500000

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.910 inches nominal

First Leg Hole Arrangement Style

three holes

First Leg Hole Diameter

0.391 inches minimum and 0.406 inches maximum

First Leg Distance Between Hole Centers Along Length

1.340 inches nominal

First Leg Distance Between Upper Hole Centers Along Width

1.000 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.280 inches nominal

First Leg Style

square

First Leg Thickness

0.139 inches minimum and 0.155 inches maximum

First Leg Width

3.180 inches nominal

First Leg Length

2.750 inches nominal

Material Document And Classification

sae assn std all material responses

Material

steel comp 1008 or steel comp 1010

Mounting Hole Type

plain

Second Leg Distance Between Hole Centers Along Length

1.000 inches nominal

Second Leg End Radius

0.800 inches nominal

Second Leg Hole Arrangement Style

two holes

Second Leg Hole Diameter

1.005 inches minimum and 1.010 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.800 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.800 inches nominal

Second Leg Thickness

0.139 inches minimum and 0.155 inches maximum

Second Leg Length

4.240 inches nominal

Second Leg Relationship To First Leg

not identical

Special Features

second hole on second leg 0.551 min and 0.559 max diameter

Style Designator

angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

11862

General Motors Corp Chevrolet Motor Div Special Products Dept

U.s./canadian manufacturers

7X677

General Motors Llc Dba General Motors Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-01-160-4591?

   The FSCG of the NSN 5340-01-160-4591 is 5340

2. Does the NSN 5340-01-160-4591 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-01-160-4591 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-160-4591 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-160-4591 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-160-4591 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Tue, Aug 23, 1983