NSN 1411656

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6520-01-533-1979 end item identification, needle obturation endodontic 20ga 5s part name assigned by controlling agency, 20 gage, obtura applicator needles; for use with the obtura ii gutta percha delivery system; pack of 5 special features.

NSN 6520-01-655-4840 Datasheet

(NSN) National Stock Number

6520-01-655-4840

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-655-4840

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, May 31, 2016

End Item Identification

6520-01-533-1979

Part Name Assigned By Controlling Agency

needle obturation endodontic 20ga 5s

Special Features

20 gage, obtura applicator needles; for use with the obtura ii gutta percha delivery system; pack of 5

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1849854

Cross Reference

CAGE Codes

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

64616

Defense Medical Standardization Board

U.s./canadian manufacturers

1DHC9

Obtura Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

43100

Water Commodity

712 - Furniture, new, other than hhg

National Motor Freight Classification Item Number

080520

Questions & Answers

1. What is the FSCG of the NSN 6520-01-655-4840?

   The FSCG of the NSN 6520-01-655-4840 is 6520

2. Does NSN 6520-01-655-4840 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6520-01-655-4840 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6520-01-655-4840 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6520-01-655-4840 was assigned to the Federal Catalog?

   It was assigned 10 years ago, on Tue, May 31, 2016