NSN 15098059

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

handset and holder assembly part name assigned by controlling agency.

NSN 5965-01-644-1485 Datasheet

(NSN) National Stock Number

5965-01-644-1485

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

01-644-1485

Requires Demilitarization

Yes

(INC) Item Name Code

00786

Date

Thu, Apr 23, 2015

Schedule B Code

8518903000

Part Name Assigned By Controlling Agency

handset and holder assembly

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000786

Cross Reference

CAGE Codes

K6451

Bae Systems Marine Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

28199

L3 Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-01-644-1485?

   The FSCG of the NSN 5965-01-644-1485 is 5965

2. Does the NSN 5965-01-644-1485 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-01-644-1485 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-01-644-1485 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-01-644-1485 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-01-644-1485 was assigned to the Federal Catalog?

   It was assigned 11 years ago, on Thu, Apr 23, 2015