NSN 1549947-7

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.300 inches nominal body width, 0.300 inches nominal body length, 0.047 microfarads single section capacitance value per section, 0.100 inches nominal body height, w/o mtg facilities terminal(s) on one surface body style.

NSN 5910-01-076-4955 Datasheet

(NSN) National Stock Number

5910-01-076-4955

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-076-4955

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Mon, May 7, 1979

Schedule B Code

8532290040

Body Height

0.100 inches nominal

Body Length

0.300 inches nominal

Body Width

0.300 inches nominal

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

0.047 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Dissipation Factor At Reference Temp In Percent

0.1500

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

83298-1549947 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-15.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

05937

Gaines Foundry Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-076-4955?

   The FSCG of the NSN 5910-01-076-4955 is 5910

2. Does the NSN 5910-01-076-4955 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-076-4955 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-076-4955 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-076-4955 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-076-4955 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Mon, May 7, 1979