NSN 16-045

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

kgn;analyzer,gas; e/i fscm 62170 end item identification, phd plus;ultra;with foam general characteristics item description.

NSN 6665-01-444-5630 Datasheet

(NSN) National Stock Number

6665-01-444-5630

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6665 - Hazard-Detecting Instruments and Apparatus

(NIIN) National Item Identification Number

01-444-5630

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, May 10, 1997

End Item Identification

kgn;analyzer,gas; e/i fscm 62170

General Characteristics Item Description

phd plus;ultra;with foam

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1774522

Cross Reference

CAGE Codes

39SU9

Honeywell Safety Products Usa, Inc.

U.s./canadian manufacturers

62170

Biosystems Inc Div Sperian Protection Americas Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

92305

Water Commodity

846 - Fabricated nonmetallic materials

National Motor Freight Classification Item Number

187645

Questions & Answers

1. What is the FSCG of the NSN 6665-01-444-5630?

   The FSCG of the NSN 6665-01-444-5630 is 6665

2. Does NSN 6665-01-444-5630 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6665-01-444-5630 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6665-01-444-5630 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6665-01-444-5630 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Sat, May 10, 1997