NSN 16-5447

A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. Excludes:arm (as modified); lever,remote control; and bell crank.

ac circuit current for which designed, unable to decode accuracy in percent, 2 threaded stud and 2 solder lug circuit attachment method and quantity, white single indicator all ranges background color, as modified by measurement range per indicator departure from cited designator.

NSN 6625-00-892-5318 Datasheet

(NSN) National Stock Number

6625-00-892-5318

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-892-5318

Requires Demilitarization

Yes

(INC) Item Name Code

16449

Date

Mon, Jan 1, 1962

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator all ranges

Circuit Attachment Method And Quantity

2 threaded stud and 2 solder lug

Circuit Current For Which Designed

ac

Departure From Cited Designator

as modified by measurement range per indicator

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

3000.0

Environmental Protection

dustproof

Features Provided

zero adjuster

Frequency Response Range

+25.000 to 125.000 hertz

Fsc Application Data

test set electronic

Indicator Type

dial w/pointer

Installation Design

panel

Material

steel

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.800 inches maximum

Meter Depth Behind Mounting Flange

2.450 inches maximum

Mounting Arrangement Style

three hole/stud bolt circle

Mounting Bolt Circle Diameter

3.160 inches nominal

Mounting Hole Diameter

0.143 inches minimum and 0.157 inches maximum

Mounting Facility Type And Quantity

3 unthreaded hole(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving iron vane

Nuclear Hardness Critical Feature

nonhardened

Overall Diameter

3.510 inches maximum

Overall Length

2.850 inches maximum

Pointer Color

unable to decode

Power Source

external

Scale Graduation Type

unable to decode

Scale Selection Method

terminal

Sensitivity Rating

4.0 ohms per volt

Special Markings

red line at 120v and 208v,150v scale marked single phase,300v scale marked three phase

Style Designator

round flush mtg

Surface Treatment

enamel semigloss

Test Data Document

"81349-mil-m-10304 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016449

Cross Reference

CAGE Codes

33005

Jewell Instruments Llc

U.s./canadian manufacturers

52151

Continental Electronics Corp

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-892-5318?

   The FSCG of the NSN 6625-00-892-5318 is 6625

2. Does the NSN 6625-00-892-5318 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-892-5318 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-892-5318 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-892-5318 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-892-5318 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962